Taurus Industrial Sales Inc. - Terms & Conditions

Belt Breaks
Causes	Corrections
Incorrectly made splice/poor adhesion	Bring belt to Taurus' attention
Too heavy work pressure	Reduce pressure, use coarser grit size, change belts
Cone shaped roll or roll/shoe not parallel to carriage or feed belt	Dress roll to remove cone shape Re-align system
Not enough belt tension under work load	Increase belt tension Do not over-tighten
Too much belt tension for grit in use	Adjust tension Should not be more than required under load to prevent slippage
Foreign particles finding their way inside belt between roll or platen	Eliminate the possibility Efficient dust collection best prevention
Shock load against belt such as overlapping one panel over another or thicker panel than for the set-up	Guard against double sheeting oversize panels
Belts creased or damaged in handling	Handle carefully

We accept Matercard, Visa and Interac

TISI © 2000 - 2007

Home • Customer Service • Why TISI? • Troubleshooting Guide • Terms & Conditions • Site Map • Staff Login

Graphic Design by RTB Wizards

Site Created by Shannon Devantier

Monday, February 12, 2007 07:29:40 PM -0700